WEN 3962 Two-Speed Band Saw with Stand and Worklight Review

WEN 3962 Two-Speed Band Saw with Stand and Worklight Review

In this article, we will talk about the WEN 3962 Two-Speed Band Saw with Stand and Worklight Review. It is a perfect companion for any workshop. The WEN 10-Inch Two-Speed Band Saw even more complicated for new beginners, who always have to make compromises and hard choices when it comes to quality and price.

There is the risk of investing in a tool that ultimately turns out to be the exact opposite of what you expected is so easy and smooth in use and is easily acceptable for any workshop.

WEN 3962


Using this band saw you can make endless work. So if you are looking for the most valued and useful band saw then you are in the right place. It has the ability to make accurate bevel cuts with high cutting capacity. This saw has a two-speed motor that can create cuts.

The wen 10-inch -velocity band saw is the right associate for any workshop. It would also save you the costs of finding a large band saw whose cutting capacity you will not fully utilize. For bulky and industrial woodworking, you will need a saw with a powerful motor and sharper blades.

It is easy to assemble and stand elevates without sacrificing space. The dust port is also a welcomed feature.


  •         3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
  •         Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
  •         Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
  •         Operates at two speeds of either 1520 or 2620 FPM
  •          The optional stand allows for either floor standing or benchtop applications
  •         Includes a 2-year warranty, a stand, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)

Pros & Cons:

  •         A powerful 3.5 amp motor that can manage to cut 6 inches deep and 9¾ inches wide
  •         Versatility in speed- you can set it at 1,520 or 2,620 feet per minute (FPM)
  •         It enables 45-degree bevel cuts
  •         Spacious and sturdy table if dimensions 14⅛ by 12½ inches.
  •         The 9-3/4 inch width and 6 inch deep cuts are not ideal for thicker workpieces
  •         The tension knob breaks off readily (it is plastic-made)
  •         The blade and tilt are difficult to adjust and set up


  •         This band saw has a 3.5 amp motor that creates cuts up to 6 inches deep and 9-3/4 inches wide.
  •         Two-velocity operation permits for speeds of either 1520 or 2620 fpm.
  •         Easy to assemble stand elevates the band saw without sacrificing space on the shop’s workbench.
  •         This allows you to have better control of your cuts without getting skewed or warped. You have a strong stand to keep the cuts clean.
  •         Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, 3/8 inch blade (6 TPI).
  •         Spacious 14-1/8 x 12-half of inch solid aluminum paintings desk bevels as much as 45 ranges.

Cutting Speed:

The WEN 10 Inch band saw has a perfect speed. This band saw gives you the versatility of two speeds. You can set it at the lowest speed for soft workpieces.

 If you want to cut hardwood you can also set it at high speed. It has sufficient cutting power. It can bear large wooden loads without much of a struggle.

WEN 3962

Switches and Tensioning Knobs:

For an easy task when it comes to changing blades, find saws with column-mounted switches. Also, the tensioning knobs will work well if they extend over the top wheel housing.


When working with WEN 3962 safety measures are first priority. You should work very carefully when using it. This saw is different than others and could be dangerous if safety measures not taken.

WEN 3962

Check The Latest Price on Amazon

LED lights:

This tool is highly dependable on lights, and led lights are something that makes you all clear5 while using it in a dark room or area. It is specially made for its table and makes work easy.

The downside is LED that is attached to the backside and it shines more in your face than on the worktable. However, the light extension is a little flexible, allowing room for adjustment.

Table tilt:

It facilitates achieving bevel cut in one or both directions. You will have to flip over the workpiece to end the angular cut. Some users prefer to have a saw with the table tilt feature. Table tilt is an important condition for your work.


This saw is best for any woodcut and it is smooth in use, as it assembles any part of wood easily and the cut it the shape you want. It is good in price and not so expensive so get this for your workshop as it is recommended as the best tool.